Adkrete Concrete Services, Inc. provides “Turnkey” Stamped Concrete surfaces. Stamped Concrete is a
decorative finishing technique achieved by first adding a “base” color directly into the concrete truck when
it arrives onsite. Once the concrete is placed, screeded and then floated, the decorative process of
stamping begins. A secondary, highlighting color is broadcast over the entire area. This highlighting color
has two purposes; one is to add the secondary color to achieve a more natural, mottled look. The second
purpose of the broadcasted color is to allow the rubber stamps to imprint the concrete and release
without pulling any concrete up when the stamp is removed. The secondary color is know as the “Release
Agent”. After the entire area has been stamped and allowed to dry (cure) for a couple days, Adkrete
comes back to remove the majority of the release agent. All that is left behind is just enough in the lower,
imprinted areas to achieve a natural, multicolor effect. Once the proper amount of release agent is
removed, and the concrete is properly cleaned, Adkrete applies a very unique sealer to the concrete. We
use a state of the art, cutting edge sealer known as PAP (Polyaspartic Aliphatic Polyurea). The technology
of the PAP sealer is relatively new to the industry. PAP sealers are much stronger and durable than epoxy
sealers and they do not yellow. PAP sealers are ideal for exterior decorative concrete.
Adkrete Concrete Services
Phone: 865.824.3097
Fax: 865.512.7950
Email: info@adkrete.com
PO Box 382
Powell, TN 37849
Stamped Concrete
Adkrete Concrete Services, Inc. provides “Turnkey” Stamped Concrete surfaces.
Stamped Concrete is a decorative finishing technique achieved by first adding a
“base” color directly into the concrete truck when it arrives onsite. Once the
concrete is placed, screeded and then floated, the decorative process of stamping
begins. A secondary, highlighting color is broadcast over the entire area. This
highlighting color has two purposes; one is to add the secondary color to achieve a
more natural, mottled look. The second purpose of the broadcasted color is to
allow the rubber stamps to imprint the concrete and release without pulling any
concrete up when the stamp is removed. The secondary color is know as the
“Release Agent”. After the entire area has been stamped and allowed to dry (cure)
for a couple days, Adkrete comes back to remove the majority of the release agent.
All that is left behind is just enough in the lower, imprinted areas to achieve a
natural, multicolor effect. Once the proper amount of release agent is removed,
and the concrete is properly cleaned, Adkrete applies a very unique sealer to the
concrete. We use a state of the art, cutting edge sealer known as PAP (Polyaspartic
Aliphatic Polyurea). The technology of the PAP sealer is relatively new to the
industry. PAP sealers are much stronger and durable than epoxy sealers and they
do not yellow. PAP sealers are ideal for exterior decorative concrete.
Adkrete Concrete Services
Phone: 865.824.3097
Fax: 865.512.7950
Email: info@adkrete.com
PO Box 382
Powell, TN 37849
Stamped Concrete
